INTENSITY SOLIS LED DRIVING LIGHTS

A NEW INTENSITY OF DRIVING LIGHT

Filled with features, Intensity Solis driving lights are available in a Spot or Flood beam which come with interchangeable red and black die-cast side bezels. New to the Intensity range is the Solis’ 5-stage dimmability function, while the introduction of a highly tuned single-piece reflector and 165 watts of OSRAM LED performance bring it to the top of the class in light output.

 

Not just a remarkable performer, Intensity Solis driving lights represent a value proposition that is worth considering if you’re looking to add some additional driving lights to your vehicle.

EXPLORE THE FEATURES

36 OSRAM LEDS

5 STAGE DIMMABILITY
VIA DIGITAL TOUCHPAD

SPOT & FLOOD VARIANTS

INTERCHANGEABLE BEZELS

SILICONE SLEEVED

For durability and protection

5 STAGE DIMMABILITY

5 preset output settings allow you to alter the intensity of your Intensitys!

POLYCARBONATE LENS AND LENS COVER

Virtually indestructible

INTERCHANGEABLE BEZELS

Interchangeable red and black cast aluminium side bezels give you the choice of running a red highlight or keeping the lights all black!

ADJUSTABLE BRACKET

High-pressure die-cast aluminium mount brings the light lower on its fastening position to increase strength and limit light bounce.

THERMAL MANAGEMENT

Cooling is maximised via the die-cast aluminium body allowing the efficient dissipation of heat from the light housing.

IP68 WATERPROOF RATING

Submersible up to 3 metres.

36 OSRAM LEDS

The combination of 6x 10 watt and 30x 4 watt LEDs make up the full set with varying narrow and wider beam angles to optimise performance

ONE-PIECE REFLECTOR SET

Featuring a one-piece reflector with 36 unique and independently tuned reflector cups.

 

FLOOD AND SPOT VARIANTS

The Intensity Solis range is available in dedicated spot and dedicated flood variations which connect to a centralised dimming controller in the wiring loom.

INTENSITY SOLIS

FLOOD LIGHT

(shown with black bezels)

INTENSITY SOLIS

SPOT LIGHT

(shown with black bezels)

Spot, Flood or a Combination?

How you set up your driving lights should reflect the type of driving and terrain you are driving in.

In areas of wide open land and fast roads such as Outback Queensland, New South Wales and the Northern Territory, a set-up of two spot lights will give you the best throw of light reaching as far down those long straight roads as possible.

For drivers who are predominantly in heavy bush with lots of winding roads such as the Victorian High Country, a set-up of two flood lights will fill the foreground, giving you great visibility to the side of the roads where roos like to hide and throught he next close corner.

For most drivers, however, the combination of one spot (driver’s side) and one flood provides the best of both worlds. The single spot throws a strong direct beam down the road over 1km, while the flood beam fills the foreground and roadside what is often considered the optimal driving light pattern and output

LIGHT OUTPUT AND DIMMABILITY

The combination of 6x 10 watt and 30x 4 watt performance OSRAM LEDs with a highly tuned reflector design has brought the Intensity Solis to the top of the class in light output.

Measured as a pair of spot beams, the Solis boasts 1 lux @ 1462 metres. Individually, a single flood beam will achieve 1 lux @ 729 metres while one spot beam has an impressive 1032 metres throw.

Lights this bright need some level of containment, which is why Intensity Solis lights are sold standard with a 5-stage dimmability switch.